Try the same thing with an MR16, you will be impressed. 😉
I'm sure I will be... until I see the price tag! 🙂
I kind of like the idea of light 'pixels' along the roofline of the house. It would be cool to see a 'wave' of color 'spread' across the house. But I just don't think this is an idea that's going to pan out.
There is another option, fiber optic cable. I have a 20' section of 1" think cable (which is made up of a bundle of cables). It’s an "edge light" cable so light is emitted along its length, like a rope light. The big difference between this and a rope light is you can put a color changing source on the end and "morph" between colors.
Sounds interesting, Ben. Where do I get some?
There are tons of companies that sell the stuff. Google should turn up many of them (try Fiber Optic Lighting). Its also used in the pool industry to edge light a pool. BTW there are two types of edge light fiber, solid and stranded.
NogginBoink wrote:I'm sure I will be... until I see the price tag! 🙂I kind of like the idea of light 'pixels' along the roofline of the house. It would be cool to see a 'wave' of color 'spread' across the house. But I just don't think this is an idea that's going to pan out.
Oh, it's panning out... 🙂
Stay tuned for more details.
P. Short wrote:Don't you already have one solution?http://www.response-box.com/rgblights/2007point.shtml
--
Phil
Yep. But the quest for smaller / cheaper / cooler seems perpetual.
There's nothing wrong with the design above, actually. I've been meaning to post a video clip of a string of 8 in action. They're quite bright and actually look good from a few blocks down the street.
Will drag out the camera this afternoon.
I was just going to say it is used in pools and sometimes backyard decks. I would actually consider that idea too but the thing is you can pan the colors unless you had many small sections with each linked to each other with a Cat5 cable as small slave controllers daisy-chained from one master to save on cabling.
Here's a simple diagram:

The LED lights driving each fiber optic rope would be on a controller board located at the beginning of the tube section. At this point, it would also link to the next tube as we could easily run the cabling along the tube to the next driver and do the same for the next.
If JEC's design could have one power supply and one controller (the master box in my diagram) each pixel or driver module for each length could be a possible solution. I know i would be interested in using such design in my own display! 😀
DJzrule wrote:Using a belt sander on the rounded parts of the LED's to make them more flat also makes them diffuse the lights a little better.
How much should you sand off to get optimal diffusion?
