To give you the idea of what im doing here is a icicle picture 96 in a row spaced 6 inches
Also only 7 led to make 1 cat 5 work
I like the idea Ron! Try one with the LED’s facing towards the inside instead and see if the tube will light up any. I know the light mostly goes straight out the front, but not 100%. Maybe try varying the depth of the LED’s also. This is similar to an idea that I have.
The leds I have are 20 only degree Im hoping from 20 ft upand 25 away they will look good (My display is only veiwed from the street)
this picture is just another idea im thinking about.this should keep them straight and help
with storing .
I havent had muck time to play but its getting there...maybe buy sunday ill do a test run
i just have to conect the 8 cathodes and fire it up.
It looks very interesting.
I'm noodling around with the idea of using RGB LEDs with a small ($0.50) PIC on each light to do something similar (each LED would be independently dimmable). Obviously this would be somewhat more costly than what you're doing. I haven't given it much thought yet, but it might be more economical to use either a 7x6 or 9x8 charlie-plexed scheme with a small PIC for every few risers.
Did you look into using some sort of transparent or translucent tube (or channel) in place of the PVC tubing?
