Another Simple Rena...
 
Notifications
Clear all

Another Simple Renard

84 Posts
21 Users
0 Reactions
34.2 K Views
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
[#15381]

Just thought you would like to see what we are working on now, Simple Renard LCC 16. It has on board triacs which can handle up to 800ma. per channel, this is one of those controllers you may have wished you had for doing all the small decorations and single strands of lights or maybe even make a mini mega tree for inside the house, the PCB is only be 3.8” x 4.8” so it will not take up much space, BTW LCC stands for Low Current Controller or Low Cost Controller. Nothing is final on the Scuzzy or PCB layout; any comments good or bad are welcome.


From the Dungeons of Mactayl and Tstraub


83 Replies
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

I am curious...

We seem to be inventing ways to save money by reinventing the 'standard' components in the Renard series. I love this newer controller series with the big, more powerful pic, instead of many smaller pics. Having the ICSP header is a very nice enhancement.
We have also replaced triacs with transistors where it makes sense (REN48LSD). Transistors cost 5cents while triacs are more like 50+cents.

Has anything come on the market that would save us money in the opto isolation arena? All those moc3023's add up in cost.
Is there something like a sip resistor that provides multiported opto isolation?


Reply
Mactayl
Posts: 2491
Guest
Topic starter
(@mactayl)
Member
Joined: 17 years ago
ukewarrior wrote:I am curious...

We seem to be inventing ways to save money by reinventing the 'standard' components in the Renard series. I love this newer controller series with the big, more powerful pic, instead of many smaller pics. Having he ICSP header is a very nice enhancement.
We have also replaced triacs with transistors where it makes sense (REN48LSD). Transistors cost 5cents while triacs are more like 50+cents.

Has anything come on the market that would save us money in the opto isolation arena? All those moc3023's add up in cost.
Is there something like a sip resistor that provides multiported opto isolation?

I see your point but this is an AC controller for small 120 volt AC applications as the REN48LSD is DC only,, this controller can run Incans and 120 volt LED strings, I would love to see something that would replace the MOC3023's but I do not know if they are available and they do eat up the cost of AC applications


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

I know of nothing that is cheaper than a 3023.

One thing that might be beneficial though would be to use a pad design that would allow the standard MOC3023 and also MOC3032M which will also accept a SOIC package.

This may give you an occasional price discount or just the ability to even get parts of any kind.


Reply
Posts: 789
(@chilloutdocdoc)
Prominent Member
Joined: 18 years ago
ukewarrior wrote:I am curious...

We seem to be inventing ways to save money by reinventing the 'standard' components in the Renard series. I love this newer controller series with the big, more powerful pic, instead of many smaller pics. Having the ICSP header is a very nice enhancement.
We have also replaced triacs with transistors where it makes sense (REN48LSD). Transistors cost 5cents while triacs are more like 50+cents.

Has anything come on the market that would save us money in the opto isolation arena? All those moc3023's add up in cost.
Is there something like a sip resistor that provides multiported opto isolation?

Few cents cheaper http://www.mouser.com/ProductDetail/Vishay-Semiconductors/K3023P/?qs=sGAEpiMZZMteimceiIVCB018%252bnXpOZmhDvOZSq1AEBQ%3d
Looks like a good candidate, might need to read the Datasheet more carefully to see if there's any turn off's... could require a different resistor setup though.

I didn't see much in terms of cheaper than what we're currently using that wouldn't draw too much power off the pic.


Reply
Page 1 / 17
Share: