Another Ren64 Appro...
 
Notifications
Clear all

Another Ren64 Approach

28 Posts
10 Users
0 Reactions
10.5 K Views
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

Even though many (some I'd really like to have) never get to production. The ideas and the explanation helps me learn the difference between a triac and a opto etc. And get a feel for my hobby even if I can't develop yet. When I started lurking here I understood 10 percent of what you said and now it's like 70 or 80 percent. Thank you!


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

I remember when the first Renard almost didn't get built because Phil got bored and moved on to something else.

Good thing someone sent him a email asking for the software.


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago

LOL.

Actually, the Renard firmware was coded up before anybody else knew about it, and I asked people to email me if they wanted an early copy of the firmware. Most of the discussion at computerchristmas was about various diy protocols, with nobody actually coding for the PICs to see if they would be up to par or not. My first boards were hand-wired for testing the firmware. The on-line posting of firmware and schematics was a second step.


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

I remember that you apologized that the code was preliminary and virtually untested and may have bugs. It worked perfectly, though I believe that it topped out at 19.2K baud. I ran that code for the first two years.


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago
ErnieHorning wrote:I remember that you apologized that the code was preliminary and virtually untested and may have bugs. It worked perfectly, though I believe that it topped out at 19.2K baud. I ran that code for the first two years.

I don't remember why there was a limitation. Perhaps it was because at one point I was advocationg using 4N35 opto-isolators on either the input or output serial pins, and I didn't really trust them to go above that speed. Although many years later I did some testing at 38400, and they seemed to work fine.


Reply
Page 5 / 6
Share: