So this year I will have a bigger pixel matrix. It will be 3528 pixels.
From reading it looks like i might have to use 2 controllers for this many - is that correct? How many pixels on each of the 16 outputs?
How many pixels would you recommend having on each run? I didn't need power injection this year with rond of 150.
the holiday coro page shows the alphapix 16 controller can do Maximum of 5,440 Pixels or 32 Universes I also know that falcon has a board that will do a ton of pixels you need too look into these if you wanna use 1 controller instead of 2
So the e682 definitely won't do enough?
Sent from my iPhone using Tapatalk
E682 can do 12 universes in Unicast. 12x510 = 6120 channels
the 682 can run 2040 pixels total or 6120 channels in unicast.
I'm using vixen or perhaps falcon player. Does anyone for see a problem with two e682s running the matrix? Would timing be an issue?
Sent from my iPhone using Tapatalk
Shouldn't be. You just split up your pixels/channels between the two controllers. I'd try to do a logical break though, and not, say, in the middle of a mini tree or mega tree.
It will be in a pixel matrix. Should I get a different controller?
Sent from my iPhone using Tapatalk
2 E682s would be fine if you want to use them. You would have some spare capacity if you wanted to add a few small elements on at a later date.
Ausrod4 wrote:So the e682 definitely won't do enough?Sent from my iPhone using Tapatalk
Yes. A single E682 can drive 2040 pixels (6120 channels). So not enough for a 3528 pixel matrix.
Also consider that you'll need some sort of power injection solution anyway. So with 2x E682's you'll have 32 fused ports through which you can provide power.
If you're running 12V you won't need anything else - just plug in and go. Even with 5V you might be ok-ish.
