4017 Chaser
 
Notifications
Clear all

4017 Chaser

1 Posts
1 Users
0 Reactions
325 Views
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 20 years ago
[#57861]

A typical triac (or opto driving a triac) is usually specified to take 5 mA or more to trigger. This is too high to trigger with a CD4017 running at 5V or so. However, there are cheap SCRs available that are spec'd to trigger with 200 μA or so, which a CD4017 is fully capable of driving with a 5V supply. The only thing to be aware of, though, is that SCRs only turn on when the anode is positive wrt the cathode, so that (with normal AC) you end with a half-wave situation (i.e. half-brightness). You need to use a full-wave bridge rectifier to get full-wave operation.


Share: