This is my first year, and I like to build my own stuff. A simple laptop with it's own wireless router, Vixen 3 and 30 nodeMCUs all over the place dr...
I use the more "automotive" style waterproof connectors, since I have had a long track record with their performance. I have never used the xconnector...
Well, after reloading the latest build with no anti-virus, everything works like it should. I knew it was going to be an easy fix. Thank you!
I'm going to try and reload the app without my antivirus and give that a try.
The sign works fine with just the sequence, and it used to work fine before I did the update to the U2 build. It's just a 5 second sequence with only...
That was very helpful. Now my sequences run after each other like they should. I hate to sound like I'm whining, but now my "tune to" sign doesn't w...
It always seems like it's some tiny little detail. When I looked at my data on the data stream, my header was >>50
I don't have the IDE open when I'm running vixen. I thought I was referring to the port monitor that was suggested that I use for troubleshooting. I...
I downloaded two different port monitors, and neither worked. Both when loaded and launched, looking at the com port the arduino is on, kept me from ...
To address the question of how the com ports are configured in the device manager, here's a screen shot.
Yes, I've hooked everything up to my non-powered hub, and programmed each with the exact same sketch, selecting the proper com port in the tools secti...
Well, I do have a handle on the pin number and com port not being related, but I appreciate your comment because I've missed more obvious things that ...
The serial port seems to be working based on the receive led on the arduinos being lit. When I didn't have my serial port connections proper, I would...
This is the code I'm using in all the Arduinos. They are all the same. Yes, I close the programming ide, and each controller is on it's own com port...
