mikejxms wrote:Post tested , test poster Mike Does that mean we're in the post-test phase... or the past-test, post-taste, post-haste, past-taste,...
cwalkeree wrote:Is it relatively easy to have all your networks sync up and "be on the same beat" so to speak when using Vixen? How close do you wan...
jklingert wrote:Quoting from the wiki: "Based on the pcb trace widths, each triac can handle up to two amps of current." It is the pcb traces that li...
JHinkle wrote:Brian: The secondaries are in parallel. It is the same transformer used on the Renards. What do you do to a Renard to operate it at 2...
Tallahassee Dreamer wrote: ... construct a ethernet to 9 pin connector using the schematics in the wiki. Just a slight note here... The 8P8C (8 po...
chadowamsley wrote: The good news, for me at least, I talked my brother into helping as far as sequencing for my parents home. So I just have to sequ...
P. Short wrote:Jealous, are you? Just because palms don't grow too well in Nova Scotia? Phil, are you trying to say he has a case of Palm Envy??? ...
PurpleNeons wrote:Thanks guys for your patience.....let me get this clear and I apologize for my lack of knowledge when it comes to wiring, but this i...
Got it!:)
Looks great, Phil. Unless I miss my guess, the left outlet pair needs to be inverted to bring the "hot" connectors to the center of the board. At le...
brodie4416 wrote: The only place I have this issue is with sections of lights that are plugged into the outside type outlets which have the red and b...
Be advised - sheds for blinky-flashy stuff usually need to be up around 10-15 thousand square feet!!:)
Chad, once you connect a USB adapter, Windows will try to configure it and assign a comm port number to it. You might need to supply (or download) a ...
imateo44 wrote:So I am sure that it has been discussed, however I am not finding alot for my specific question. What I am wondering is this, I am go...
chadowamsley wrote:I'm a first timer here so hopefully my question isnt to bad. I'm playing around with vixen to get use to the layout and all, but I...
