power question...
 
Notifications
Clear all

power question...

6 Posts
4 Users
0 Reactions
2,405 Views
Posts: 29
Topic starter
(@imateo44)
Eminent Member
Joined: 15 years ago
[#18038]

So I am sure that it has been discussed, however I am not finding alot for my specific question.

What I am wondering is this, I am going to be running max of 3 ren ss24s next year. This will run all of my lights so I will just have three extension cords going from my house to each ren ss24 (Is this correct). I will have max of 3 runs of mini incandencts (sp) on each channel. Which leads me to my question. I live in an over/under duplex and only have access to two sets of outlets on the outside of the house. Will I be safe on plug in one extension cord into each outlet (so two in one box and one in the other) or will I have to add some more breakers?? I will have to figure out which breakers in the box goes where, but I have 50's, 40's, 20's and 15's in my pannel.

If this has been answered please direct me to the thread, and this one can be locked once i find the other one. lol

Thanks in advance. Matt


5 Replies
Posts: 564
(@jackfrost)
Honorable Member
Joined: 16 years ago

To answer that question , you would need to know the breaker amperage for the outlets and what extension cords ( ratings ) you are using .... ( and you have 40 amp breakers ? in addition to the 2 main 50's )


Reply
Posts: 789
(@chilloutdocdoc)
Prominent Member
Joined: 18 years ago

Well, what most of us do, and what I'd advise doing is creating a spreadsheet (Excel, OO Calc, dare I say it, paper) of each channels current draw, then you can add it up and see what your current requirements will be. Then you can see what size cabling you will need, and if your breakers will be enough. It's hard to say without knowing what power you do have available, or what amount of lights you want to plug in, but having all the information would help make a more informed decision.


Reply
Posts: 29
Topic starter
(@imateo44)
Eminent Member
Joined: 15 years ago

ok and I will get some more information and figures as soon as I can to see if I can get some answers. Thanks for now guys. will update asap


Reply
Posts: 987
(@wirewrap)
Noble Member
Joined: 18 years ago
imateo44 wrote:So I am sure that it has been discussed, however I am not finding alot for my specific question.

What I am wondering is this, I am going to be running max of 3 ren ss24s next year. This will run all of my lights so I will just have three extension cords going from my house to each ren ss24 (Is this correct). I will have max of 3 runs of mini incandencts (sp) on each channel. Which leads me to my question. I live in an over/under duplex and only have access to two sets of outlets on the outside of the house. Will I be safe on plug in one extension cord into each outlet (so two in one box and one in the other) or will I have to add some more breakers?? I will have to figure out which breakers in the box goes where, but I have 50's, 40's, 20's and 15's in my pannel.

If this has been answered please direct me to the thread, and this one can be locked once i find the other one. lol

Thanks in advance. Matt

Matt, (remember, this is theoretical since I can't see your setup) most likely your two sets of outlets each have both outlets on the same circuit. You have to physically break the jumpers on the hot and neutral connectors to separate them. If this has not been done, and separate feeds run to each side of the outlets, you probably have only a 15 amp circuit available. If the slots of the outlet are only parallel, it is a 15-amp circuit. If the "hot" slot (the shorter one) is a "T" shape, then it is likely a 20-amp circuit. This is only true if the electrician followed code when wiring the house. (You don't want to know how often that isn't the case!!)

In any event, with the Ren24 loaded with 3 sets of incandescents on each channel, you are talking about (roughly) 12 amps on each of the two banks of triacs. This would require an extension cord for each side of the Renards, or an extension cord rated at 30 amps. The other end (house end) would have to be fed by a dedicated 30-amp outlet and circuit. If you run two cords (rated at 15 amps) to each Renard, you will need to find a circuit for each of them.

By careful planning and sequencing, you can track the loading for all six banks and make sure that you never exceed the load capacity of an outlet, but you are safest ensuring that you have enough circuits to handle an inadvertant "all lights on" without overloading. Good luck!

🙂


Reply
Page 1 / 2
Share: