I have one question why does every 2nd rj45 have 9 holes, i have high lighted it in an attachment. Thanks, Will
I got it in the pther thread i posted earlier, Thanks. Will
Thanks for the help everyone especially Ronp. Thanks, Will
Ronp wrote:pin1 is power, Pin 2 is channel 1, Pin 4 is channel 2, Pin 6 is channel 3, Pin 7 is ground and Pin 8 is channel 4. Connector B will output ...
Ronp wrote:yes using the proper resistors they should run forever. thats how some members do there snow fall in there display . Thanks for all the ...
Ronp wrote:you can drive some leds directly off the grinch or 595 . the outputs to the ssrs will power the leds instead of the ssrs . The controllers ...
And can some one please let me know how to hook it up (what wires to what pins, etc..) Thanks, Will
Thats what i was thinking you were talking about, So if i hook the output of the grinch up to the icc i can get more amps? Will
Wayne J wrote:The IC's used on the grinch are actually LED drivers. If my memory serves me correct they can handle up to 90mA per channel. how many ...
dnesci wrote:Will, The Grinch will sink 5 volts but it is limited on the current it can handle. If you are going to require more than a few milli am...
Ok, so this isnt going to work like i wanted it to, i need to controll some 5 volt items so i wanted to just cut the cables comming off the grinch and...
dnesci wrote:Will, It sends an on/off voltage (close to zero for off, close to 5volts for on). Any code is handled by the computer (or in the case o...
one more question after the grinch on the renard does it actually sent "code" to the ssr's or just voltage. Will
