I was able to change name and ip and then connect back... thankfully. Sent from my SM-G781V using Tapatalk
I'm connected! It was assigned a random IP address. I need to turn off DHCP. I didn't see it on the router last night, but I have it now. Thanks g...
Definitely on same wifi... does router settings matter? I can connect to my e6804 and e682s with no problems Sent from my SM-G781V using Tapatalk
copied and pasted this.... Writing at 0x000e7000... (100 %) Wrote 131072 bytes (61096 compressed) at 0x000db000 in 5.4 seconds (effective 196.0 kbit/...
Where would the log be?
I will tonight after work. It looked like it worked to me, but it's my first time trying so... Thank you!
MartinMueller2003 wrote:A little more information needed. Such as links to the product you are trying to install (Not familiar with RenardBridge), the...
pmiller wrote:Could be a patching issue. One thing that got my attention is your channel count. The SS boards only have maximum count of 24 outputs. T...
pmiller wrote:Okay. Not sure what Renard boards you are using but if it's the SS boards this is how to connect for Renard. Using Cat5e install a RJ45...
WakeFan wrote:Used this method Sent from my SM-G950U using Tapatalk Pic didn't go very well...its on page 24 of the e682 manual Sent from my SM-G95...
Sent from my SM-G950U using Tapatalk
MikeKrebs wrote:Interesting problem. To rephrase...a string of LED lights plugged into channel 57 causes strange behavior on other channels including ...
I set up a new Vixen 3 sequence from scratch, the channels did the same thing. So it's not a Vixen 2.5 issue. I swapped pics in the controller before...
