Edited to remove my reply. I totally missed page 2 of the thread where several people explained there are Arduino based renard boards.
And make sure your Arduino IDE is closed. If you let it open after saving the sketch to the board, it will keep the COM port locked for itself and Vix...
CatMan42 wrote:I can't speak for everyone, but I became interested in this hobby when I saw zparticle's YouTube video's of his build. He used the Sain...
I am seeing a lot of people ordering those SaintSmart 8 channel boards and then having to remove the SSRs, buy new ones that are random cross, and sol...
Thanks, I feel a bit silly for not looking it up in the reference manual myself :shy:
madsci1016 wrote:Actually, on that AVRLEDancer.c file interrupts are disabled during the uart receive interrupt. The AVR automatically disables global...
madsci1016 wrote:Victor, My version of LEDancer was written in C and uses Renard, vs the orginal written in assembly and using DMX. You can see how t...
Right now I am not planning on using it, but rather on reading it to learn more, so don't worry on polishing it just for me, but when you think it is ...
Nice, thanks for sharing.
madsci1016 wrote:Hi guys, I'm going to be building my own ARM based hardware this year for next season, which would involve writing code to receive d...
LightUp wrote:I'm not clear what your technique achieves. One SSR is the inverse of the 2nd SSR. So how do you program the channel in Vixen when Vixen...
vietnamezeboi17 wrote:Hi All, I'm new to this area and I've been reading a lot.... I'm using a SaintSmart Mega 2560 and 4 of the 8 SSR (dimmable) sket...
vietnamezeboi17 wrote:Hi All, I'm new to this area and I've been reading a lot.... I'm using a SaintSmart Mega 2560 and 4 of the 8 SSR (dimmable) sket...
Kingofkya, I don't mean a single board that supports all the protocols and connections, but different versions, or even different board, as long as it...
So I have a couple of Keith boards, which provide 32 channels each. I have nRF modules, but have not tested them yet with those. Would be nice if ther...
