Am thinking of topping mine with sparkle balls.. $2 worth of dollar store cups and a few lights
Pic bypass jumper isn't set to bypass is it? I had that problem with the same symptoms.
Or combine the white icicles with the white side roof, and same with blue.. There's two more free channels.
I just bought 6 cg1500's from Dfcountryman. Shipped from tx to fl in 3 days!
I went two different routes. I bought "fairy" lights from Amazon ($3.99 a string) and converted them to full wave (about 100 strings of 100 LEDs), and...
Just a quick update.. I was missing the obvious. The pic/bypass jumper was set to bypass on the first controller... Don't know how I ended up doing th...
I'm going to swap out the two controllers for two of my other ones and see if the issue continues. I also changed out the cat5 between them, but that ...
Yes, I am running vixen 3.1.. I have it set to one controller with 48 outputs (two 24 channel controllers). That's how everything I have read says to ...
Looking at the asm file, I see: #DEFINE START_ADDR 0 Should this be changed to: #DEFINE START_ADDR 25 for the second controller?
Ok, changed out old usb-serial adapter, now using usb-485. Only had a single output wired on 2nd controller.. Wired up a few more. Here is what I have...
I have a brand new USB-rs485 dongle, just didn't feel like loading the driver. I guess I will dig it out tomorrow and see if that fixes things. The on...
So the usb to serial is USB-rs232?
Oh, and I have jp1 installed on 2nd controller, and tried pic bypass on first controller (jp3) with no luck.
Using the new 3.1. I am using gigaware USB to serial, then db9 to rs485 via a hacked up eithernet cable. The cable between the controllers is just a n...
Thank you. I found some idiot-proof mplabs directions and got the job done.
