patmitchell wrote:Curious how this resolved. I have the reverse issue in that I have half a string that won't consistently go dark. For the most par...
My next step is swapping the MOC chips on channel 1 and 2 to see if the issue clears. Update: swapping MOC did not help
jchuchla wrote:Have you tried swapping the lights to different channels to see if the problem follows the lights or the controller channels? I just ...
Today I did verify the problem happens the worst on channels 1-4 on the first ss24 board. I swapped U6 with U8 to see if the problem follows the PIC a...
Sorry strings to me is a string of lights out of a box and strand is me connecting those strings together to make a longer light 🙂 The lights are all...
They are multiple strings on the same channel connected together to make a strand. Some strings light, others do not(intermittently because sometimes...
Vixen may not be causing it but the effect is still causing every other strand in a string to flash. If I change it to set level it does not happen so...
Sooooooooo.... The reflash works great, but now a new problem has emerged and I am not sure of the cause. I have a few channels where half the string ...
Well just a quick update. I flashed all the chips with the one from the SS16 and at first I panicked because it was not working at 115,200 baud so I m...
I was able to pull a pic from an unused SS16 and pull the hex from it, loaded it to 3 pics and will swap it in the AM. The only concern is that the ss...
I am using the cloud based mplabxpress. I figured out how to load in the asm file and clicked clean and build below are the results. Do I need to clea...
I don't know if I should start a new thread or keep working off this one I got my pickit3 and loaded the software, verified it sees it, Put a chip in ...
Sending you a pm
