tmarshal61
@tmarshal61
Estimable Member
Joined: Oct 22, 2013
Topics: 17 / Replies: 66
Reply
RE: New Halloween ChromaCharacters from Boscoyo Studio

Rick Surette wrote:Very nice Tom!!! I would like to see the Vixen file, is it vixen 3? Yes, it is Vixen 3. Attached are some documents that I create...

11 years ago
Reply
RE: New Halloween ChromaCharacters from Boscoyo Studio

Looks really good James! I have some vixen templates that I created for some of these if anyone is interested. Here is a sample video of a vixen s...

11 years ago
Reply
RE: Can you copy a Vixen Preview?

I am running 3.2. It lets you pick Modules, Media etc, but not previews, and it does not work for me. It gives me a message "Unable to locate any prof...

11 years ago
Topic
Replies: 5
Views: 2312
Reply
RE: Heat Shrink Tubing vs...

I order 3:1 dual walled heat shrink tubing in large quantities from AliExpress. (like 30 meters per lot) In the long run, it saves me a lot of money. ...

12 years ago
Forum
Reply
RE: Cheap DIY 12mm Pixel/RGB Mounting Strips

BTW... with a DIY solution, you also have a little more flexibility. With these, you can space your pixels at any multiple of 3/4 inch. So, you could ...

12 years ago
Forum
Reply
RE: Cheap DIY 12mm Pixel/RGB Mounting Strips

THurrle wrote:You could get the same amount here and save time and money. Usually shipped in a flat rate box. Yes, and those are actually better. I...

12 years ago
Forum
Topic
Forum
Replies: 42
Views: 69698
Reply
RE: 16+ striing RGB controller comparison

Wow, the Falcon Beagle and Falcon V2 looks like they will be most impressive. Particularly the Falcon v2. I like the ability to add a daughter card to...

12 years ago
Reply
RE: Can't Get Scheduler Window on Screen

jchuchla wrote:Are you using the current release version 3.1u2? That was a bug we fixed a while back. --Jon Chuchla-- I was using U1 but in an ...

12 years ago
Forum
Reply
RE: Can't Get Scheduler Window on Screen

No, I did not move it from multi-monitor. I am not sure what happened. I found it though. It is in the ModuleStore.xml file. This is what I had. ...W...

12 years ago
Forum
Topic
Forum
Replies: 4
Views: 2227
Reply
RE: How do I setup Vixen 3 Controllers for PixLite DMX Outputs?

ltay13 wrote:If you aren't getting a flashing LED on the 27 channel controller then you should definitely look at the wiring and double check that fir...

12 years ago
Reply
RE: How do I setup Vixen 3 Controllers for PixLite DMX Outputs?

jchuchla wrote:Everything you've done in software looks correct. One thing I've heard recently is that the pixlite made a change to the pinout on the ...

12 years ago
Reply
RE: How do I setup Vixen 3 Controllers for PixLite DMX Outputs?

BASSNBUCK wrote:i am new at this but have you done the patching from your element to your universe 100? and the controller setup has at least 2434 out...

12 years ago
Page 2 / 6