timon
timon
@timon
Noble Member
Joined: Dec 30, 2010
Topics: 165 / Replies: 1984
Reply
RE: Raspberry Pi for 30 bucks

I put in a will call order at my Tustin store Sat night but they were already out. They had about 100 on the shelf last weekend so they should the fas...

13 years ago
Forum
Reply
RE: 8mm with integrated ws2811!!!

Right, the WS2812B is a WS2811 in the 5050 case with LED. Ray sells them in lots of 100 for $0.13 each. The most expensive part of a pixel is adding...

13 years ago
Reply
RE: 8mm with integrated ws2811!!!

Let me be clear, $0.13 is just the price for the WS2812B LED, not for a complete pixel.

13 years ago
Reply
RE: 8mm with integrated ws2811!!!

I'm expecting they should be close to the same price as the WS2812B's which I think is about $0.13 each. I'm checking with Ray about when he'll be ab...

13 years ago
Reply
RE: Noob Hello and question.

Cheap!!!...??? Well I guess so in the overall scheme of things. I remember when Cat5e was a third of the price it is now and that was not that long ag...

13 years ago
Reply
RE: Raspberry Pi XLights Set Up

I used the 16GB version of these and it worked great plus ther are small. scootchu wrote:Two questions; What's a good sized flash drive to use for...

13 years ago
Forum
Reply
RE: New Props - Ideas with the WS2812

I'd use UV curable expoxy since you can do them much faster. Now how much does that light cost?

13 years ago
Reply
RE: Lawn Grid with pixels?

It's forced perspective. If you want a square grid when looking at a steep angle you have to stretch the grid in the direction it's being viewed. Look...

13 years ago
Forum
Reply
RE: Lawn Grid with pixels?

It should be very visible but you need to stretch the grid vertically much like they do with hiway signs painted on the road.

13 years ago
Forum
Reply
RE: get a raspberry pi for $30 and run your show

This is the USB drive that I used. It takes almost no space and that's important when mounting it the Pi in a CG case as I did. If you don't want 16GB...

13 years ago
Forum
Reply
RE: get a raspberry pi for $30 and run your show

Maybe I'll drive over and get another one for my new DNS/DHCP server. thanks for the heads up.

13 years ago
Forum
Reply
RE: Sandevice ws2811/2812's etc, did we decide that the resistor network is better at 330

World Semi recommends that at the chip there is a 330 on the input and 33 on the output. At the controller I'd thing someplace in that range.

13 years ago
Reply
RE: Thoughts or suggestions on custom DirkCheapSSR waterproof housing.

These are so cheap why not just pot them and be done with it.

13 years ago
Reply
RE: New Pixel IC Coming

The 14 pin version allows inverting the outputs so you can drive external drivers.

13 years ago
Reply
RE: Panel Mount Waterproof Connectors

Neutrik makes some damn nice connectors and they have quite a few that are water resistance.

13 years ago
Page 5 / 144