thuddman
@thuddman
Trusted Member
Joined: Mar 24, 2009
Topics: 1 / Replies: 67
Reply
RE: 10W RGB LED Driver Board PCB with BOM

20 boards with BOM to 75032, please. No insurance. Thanks! 🙂

12 years ago
Forum
Reply
RE: Issue with Ren 48LSD

If it were me, by now if have ordered another USB-RS485 adapter and would be feeding each one directly! 🙂

12 years ago
Forum
Reply
RE: How many Renard (non-pixel) channels are you running this year?

DanielSkeen wrote:300+ Renard channels, about 40,000 incans, up and running in the yard right now with a spare SS24 and a SS16 in reserve, 16 dumb RGB...

12 years ago
Forum
Reply
RE: How many Renard (non-pixel) channels are you running this year?

I have 128 channels of AC Renard control and another 96 channels of dumb RGB control. Not 100% full, but pretty close.

12 years ago
Forum
Reply
RE: First Year Videos

Looks great! Your description made it sound like you didn't get very far in your first year. You built a controller, several props, and even tackl...

12 years ago
Forum
Reply
RE: Working 115K ASM file

The PIC firmware can be compiled for a single baudrate. 57600 is the "default". The serial connection on the controlling pc/software must match what...

12 years ago
Forum
Reply
RE: Working 115K ASM file

Which controller ate you using? I compiled the code for my ren64 bit it was just a matter of changing the bandwidth setting. Are you adjusting the...

12 years ago
Forum
Reply
RE: Running my display

There are some wonderful Vixen tutorial videos for 2.x here: You can make a playlist (called a program) under the Managr Programs window. If you h...

12 years ago
Reply
RE: delays delays delays

I try to remember that whatever happens, my show will still probably be the best I've done yet, the best on my street, and enough to make people slow ...

12 years ago
Forum
Reply
RE: delays delays delays

I'm sure you're not the only one! I've had my share of setbacks this year. I've done Halloween 3 years in a row now but this is the first year I'll...

12 years ago
Forum
Reply
12 years ago
Reply
RE: Renard Bridged Outputs

There is a discussion of wall warts powered by triacs here: Spoiler: some people have been successful and others warn that it is a bad idea.

12 years ago
Forum
Reply
RE: WANTED: D-Light ACx16

Have you given any consideration to using a different type of controller? If you are using Vixen it would be possible to send existing channels in y...

12 years ago
Reply
RE: Solder station died?

I use a csi station but the wand looks similar. On mine you can disassemble the wand and replace the heating element. You might see if yours is the ...

12 years ago
Forum
Page 2 / 5