I have always delivered a box of Chocolates and a thankyou Christmas card to each of our neighbours for tolerating the increased traffic and noise in ...
Hi Steve, I'm no help. I still use Vixen 2.1x to generate them π Cheers, Terry
Hi Andrew, you are not alone in this part of the world, somewhat divorced from the center of "Blinky Flashy", I am in Nelson NZ, and am running Vixen ...
Update on the "Problem" π I "Re-created" the sequence involved by generating a new sequence, with the music included, then copy/pasted the "Known G...
Gentlemen π Thank you for your thoughts. Brian, I will endeavour to separate the painted lines as suggested, that is a good idea. Kelly, I hav...
Aurbo99 wrote:Solved Trik-C's work fine, configured correctly as per the wiki, and running .led files created for 1x2 panels. I was testing with my ...
Hi Steve, "1. create a "Y" adapter , 2 rj45 ends from the single rs232/rj45 dongle. 2. run each end to separate Trik-C boards, no series(in/out) conn...
Hi Steve, I am running pair of panels (Peg board construction) side by side setup, with Pix C interfaces in parallel, one in each panel, but still r...
Already in π
A Workaround found, thankfully π The good thing is I have now got the system going and think I have tracked down the apparent culprit! It appears ...
Hi Kelly, Many thanks for your thoughts, the "odd" thing is that the same problem occurs on both of my Win XP machines essentially set up the same wa...
TazChaLet wrote:I found 1 person so far tory street lights in Nelson, New Zealand and they are on the other sight have you looked at the you might fi...
