Activity
 
Notifications
Clear all
studiopro
@studiopro
Estimable Member
Joined: Mar 2, 2015
Topics: 5 / Replies: 111
Reply
RE: Milton Christmas Lights

My guess is ChromaMesh from Boscoyo.

9 years ago
Reply
RE: HP DPS-800GB Power Supply Breakout Board

MrTeaIoT wrote:For 700 pixels around 0.3w each total 210watts / 12v you get 17.5Amp. How do you get 25Amps out of only 700 pixels? For 25A how ma...

9 years ago
Reply
RE: HP DPS-800GB Power Supply Breakout Board

MrTeaIoT wrote:Good to hear that. I will get a few and using the breakout board so I can swap them if needed. Have you test the maximum output of th...

9 years ago
Reply
RE: HP DPS-800GB Power Supply Breakout Board

It also depends where they were used. These are really high quality power supplies designed to be run 24/7 at pretty high loads. If it was used to its...

9 years ago
Reply
RE: HP DPS-800GB Power Supply Breakout Board

rstehle wrote:Very Cool! What in the heck makes their worth $49.99? There is logic builtin that you could do remote monitoring, which adds to the c...

9 years ago
Reply
RE: Buellton Lights Walk Behind 2017

Nice "sub station" for your power. That was massive. Thanks for taking the time to walk through your display. I like seeing how others build theirs fo...

9 years ago
Forum
Reply
RE: Pixel testing

I use and ESPixelStick for my testing.

9 years ago
Reply
RE: pixels going crazy with no signal

I'm probably not a good example, but I have some pixels 20' away from my falcon and they are OK. Some things to check are, is your sequencing program ...

9 years ago
Reply
RE: Great Christmas Light Fight

I was skipping through parts last night real quick and saw that too! Shout out to Shelby!

9 years ago
Forum
Reply
RE: C9 single lights wont work

Pardon my ignorance, but I haven't worked with C9 incandescent, and don't want to assume. Do your strings have 2 or 3 wires running and what happens w...

9 years ago
Reply
RE: Damaged Wire?

So, now that I have the lights down off the house and I'm not on my ladder the problem is very apparent. The light either didn't get epoxied, or it wa...

9 years ago
Forum
Reply
RE: C9 single lights wont work

Have you checked the voltage at the socket?

9 years ago
Reply
RE: Damaged Wire?

Since it was at the end I just replaced the last 6. I already had some spare the had the end on it, so it was less soldering. Thanks for the help, it ...

9 years ago
Forum
Topic
9 years ago
Forum
Replies: 5
Views: 2659
Page 3 / 8
Share: