Your ok. I didn't realize there were p12's in the mix. P12's are not the most user friendly board I have one but I'm not going to use it bc of the net...
Well the way I look at this is I have both boards in my possesion. Hooked up, running over e1.31 cat 5 out my laptop. And Your Only reading a Manuel ...
if there are any files not uploaded let me know, I don't think I uploaded my ch config or setup config.
saying im incorrect is wrong, the frying part comes from switching the board over to DMX mode. leave them in the LOR position no matter what data you ...
xlights has the same issue. I cant see a lot of the stuff in xlights till I move it over to my projector screen then I can see everything
thebaronn wrote:I am a fellow LOR user. I have always wanted to use another sequencer, but I am lazy and stubborn and always running behind, so I alwa...
set your network on the pc to the same ip or 192.168.1.1 and hit search again. depending on your pixels if they stay on white there wrong. so go with ...
the default ip is 192.168.1.50
not confusing, it works. I ran 2 LOR controllers, 3 Renard and a J1sys pixel board last year all off one laptop. so it definitely works So go ahead ...
It can be a headech. But great board once you learn it.
Buckmaster wrote:Any ideas where I can find a "cheap" dongle to connect my Renard controller to my pc? Thanks. You don't need one. Renard will plug...
Wow yaw just made this way to complacated. I did this last year. There are 2 ways you can do this very easily. 1. Run lor with the lor dongle. In nor...
celtman123 wrote:Hooked 1 50pixel 5v strip for a test run... could only get the first 15 pixels to light up. Probably need to power-inject the string...
Just to toss in some info. You can program the string in the controller anyway you want it does not matter where the actual light is on the tree. So l...
BTW converting to dmx is simple in lor. I have no problem helping you. Pm me.
