@Si_champion Thank you That worked using the ~! in the header. It was the only part of the puzzle missing. Still can't read the serial monitor for ...
nx9i Yes. If you have a sketch that is using the Mega as stand alone or Uno then yes it should read serial.begin. If your using for example; Zpart...
@ nx9i "Serial1.begin" in a sketch for the Mega2560 refers to serial port 1 of the 3. There are 3 extra ports on the mega and when writing to them it...
@ Si_champion No I did not put in the ~! and will try that first. The line you posted to change: for (int i=0; i
@Liteup You Do have to use a "serial board" attached to Mega with Zparticals sketch on serial port1. I don't know if richer2003 needed the help for...
@richer2003 The sketch I'm using for Vixen3 is in an attachment. It is working. I'm also using the Mega2560 with 18 channels. No need to modify the ...
@ si_champion I have the sketch from Zpartical working on my Mega2560 with a FTDI board added to the serial port, but I wanted to try and use just t...
@Si_champion and @Natale I attached the Sainsmart 16 schematics for your reference. Best I can tell from the schematics the 12vdc is isolated. But y...
@ natale Thank you very much for responding!! I FINALLY figured out whats going wrong!!! This is for anyone who might be having the same Issue: I c...
Hello I don't mean to interrupt the flow of this conversation, but I was wondering if some here has a working sketch for Vixen2 or preferably Vixen3 ...
Hello Mbarros If you have a sketch that's working, would you mind sharing it? I have tried and tried to get the one I have working and all I get is ...
Hello celtman123 I'm trying to use vixen3 also, would you mind sharing your sketch? I would like to see if I can get it to interface. Rodney D
Hello si_champion Unfortunately I can't help with your issue because I have the same issue. Although it's an annoyance I just restart everything when...
Brian I figured out that drag and drop function for effects works great, no missing effect when I place them that way. I was right clicking and drop...
