Make sure you are using a small low draw motor like that. I thought you wanted to run a larger more powerful motor. That is where the driver chip is h...
On the CNC equipment I use Allegro driver chips to handle the motors as they have the Transistor bridge built in and all it takes is one pin of your p...
CLL, What hotel I still have not heard and want to get the reservation made. RJ
Wayne I can do a presentation on DMX, Cheap DIY Wireless DMX and using Vixen with LOR as well as adding cheap channels to a existing LOR setup if you ...
CLL, Demented I am not scheduled to present at the mini. They must have a full schedule. But I will be happy to demo it and the wireless DMX at the ho...
crazylightlady wrote:Have you guys nailed down a date yet? I need to book my flight asap while I can still use miles. I'm assuming we're staying at ...
Ronp wrote:Cool were lou goes there be cookies.... lol Even Better!!!!! 😎 RJ
lbro wrote:I could try to make it, but the my kids are in school until the 19th. Depends on the date. Sounds like a road trip!!! Lou Great! would ...
because this one of the easiest projects that you can do with a PIC I agree Phil, it is very easy to work with. It fit a project I am working on so ...
I should be able to make it Wayne. Looking forward to it. Let me know how I can help? I will have the presentation from the Georgia and Florida mini ...
Dad and I have a powder coat rig and used it to do a lot of powder coating on the planes and such. When we messed up on one part we tried aircraft pai...
Even this does not tell the story. The data rate you are talking about is the RF data rate. And the uart serial speed is also only a part of the probl...
I use a little larger cap and a non LDO regulator with it. It works well and the 7805 runs cool. I only put heatsinks on them to make them more rugged...
Yes they will.
I can tell you what Brian's (Macrosill) Parents and sister calls us. CRAZY! :rolleyes: They stopped by my show one year and told me he was cra...
