mciaio wrote:Thanks Martin. I am using several holiday coro 3 channel dmx controllers. Just get a HC actidongle and your done. Sets up like a si...
Check you Local AV contractor or electrical distributor. Be careful at the distributor; they will have HTTN which is a very course stranded cable w...
Thanks Brian for all you posts. You have helped me Directly and indirectly. Keep it up. Respectfully, Q
I don't Know anything about COMCAST. I do Know that there are port limitations in routers. Saying that the new router from COMCAST may have port restr...
SO I am 0 for 2 that I have built. I have had the best success with the second one. I am using an EASYPIX controller from Dave Moore. Everything exce...
SimonP, What is the net goal beyond hundreds of LEDS. I concur with above to working it to a smaller control count. Do you have a specific LED in mi...
I'm in Milton Fl and travel to the coast on a regular basis. I'd come over.
Awesome. Thank you. We were discussing power last night. Power looks the the real challenge at this point. We will over come that with a 12V soluti...
Check this out and from Dave Moore @ Holidaycoro Helped Me get out of a E682
My apologies for sharing what I think.
FWIW I have had GREAT success with Todd anf the DIYLEDEXPERESS Team. These guys hold down other full time jobs and bring their products to the rest of...
I canot change the asm to hex to load it. the PICkit2 Update found the 1826
boyelroy11 wrote:I'm not positive on the 16F1826, but if like the 16F1825, you need to replace a file in the pickit2 software. You might read through...
Got the update for the PICkit 2. Got MBLAB IDE and the x8 Conpiler. Get the following error when I build or Export HEX
