MikeKrebs wrote:Good point. The LRS-350-12 specifications say CURRENT (Typ.) 6.8A/115VAC. I was doing simple math (350 watts at 120v is 2.9 amps) ...
wilmar wrote:Can’t get petg to stick to glass ? Perfect print 16 hours but had to sacrifice the mirror lol nothing used except glass cleaner Se...
Popo-B-Trippin wrote:pmiller, I was wondering why you were telling a developer how to do it 🙂 Thanks guys... Merry Christmas! I've lost it. I met Jo...
jchuchla wrote:The Falcons definitely support pixel grouping. So do Kulp controllers, and ESPixelSticks too. I've got a set of 9 big bulbs in my show...
Just need to remember when setting group size on the controller that channels used are divided by the group size. Example, you have 90 pixels in group...
jchuchla wrote:You can just patch the same element more than once to the controller. It's generally more efficient though to do it on the controller ...
Can I ask what controller are you using? Sent from my SM-T710 using Tapatalk
angus40 wrote:I turfed the mirror and sticking with PEI for now . I don't like the idea of using glues and other materials to get a bond if not needed...
If I recall the 12 volt meanwells pull 7.5 amps at full power. Correct me if I'm wrong. Sent from my SM-T710 using Tapatalk
215 for Petg? Seems awefully low. I have mine at 250 with 70 bed. Most people I've talked too run Petg around 250. Sent from my SM-T710 using Tapatal...
I'm not familiar with Falcon controllers but I noticed you have it set to universe zero. You should start on universe one and all universes are 510 ex...
I have an Ender 3 Pro and I use 4mm Borosilicate glass with Elmers Purple Glue stick. Never had an issue with print adhesion. On larger prints and put...
Hockeyhunter1956 wrote:Clay, FWIW: I had problems much like you did. Just could not get my SS boards operational. Are your PIC's programmed? Mine...
I think 1" spacing is overkill and a waste of pixels not to mention power supplies and injecting would be kinda difficult because you may end up injec...
ukewarrior wrote:Very Nice ! it's amazing how nice these are for the money. I only paid $189 for the Ender 3 Pro. My first printer was a Monoprice Mi...
