packetbob
@packetbob
Estimable Member
Joined: Oct 30, 2009
Topics: 7 / Replies: 112
Reply
RE: Only in Canada EH !

I run a ring of GECE bulbs inside both our cars during the Xmas season (across the side and back windows) driven by an Arduino running some simple seq...

6 years ago
Forum
Reply
RE: How many 12v pixels can you power directly from an es pixels tick output?

Quick and dirty I'd say the ESPixelPOP power traces can handle 5ish AMPs with no issue... This is a WAG based on the trace widths... Each terminal pin...

6 years ago
Topic
6 years ago
Forum
Replies: 11
Views: 9474
Reply
RE: Need a solution to control ss24 over wifi for non "tech" relative

XmasInVancouver I have a spare ESPixelPOP/DMX board that you can use... We just need to mount it in a Tupperware box and power with a cell phone powe...

6 years ago
Forum
Reply
RE: Need a solution to control ss24 over wifi for non "tech" relative

Not sure if there is any off the shelf solution for the Renard SS-24.... I don't have any Renard equipment to test with but you should be able to set...

6 years ago
Forum
Reply
RE: Using DMX lights.

Do you know the various channel assignments for the DMX fixture? As in what the fixture does for each of the channels that it has? There is no standa...

6 years ago
Reply
RE: E1.31 Servo Controller

Thanks for posting that... I did play with PCA9685 module and a Rasp Pi and got it working using E1.31 data... What software did you use to control yo...

6 years ago
Forum
Reply
RE: Espixel pops stop being able to access config or flash but still on network

It may be the ESP-01 module(they are cheaply built at best).... I have built about 20 using the same batch of modules with seemingly no issues but the...

6 years ago
Reply
RE: Using espixelstick firmware to control Renard board?

I looks like the Renard boards use RS-485 signaling but with different pins than DMX does.. I think you can use any ESPixel board as long as you add a...

6 years ago
Forum
Reply
RE: Using espixelstick firmware to control Renard board?

The ESPixelStick v3.1 firmware has a Pixel and a Serial version (you can select from the Firmware drop down in the ESPixelStick Flash Tool).. Once you...

6 years ago
Forum
Reply
RE: 12v possible with wemos d1 mini outside of artstick?

As others have mentioned you can use the ESPixelPOPs to drive 12V strips.... If you are interested I have PCBs and parts for them... And I'm in Vanc...

6 years ago
Reply
RE: ESPixelstick NEW Release v3.1 Questions

I have run WLED on both ESPixelStick v1 and ESPixelPOPs... The only issue is that the full featured WLED firmware is too large for the ESP-01 modules ...

6 years ago
Reply
RE: software for static control over individual pixels

Ah.. Missed the ucs1903 part... This doesn't appear to be supported by WLED....

6 years ago
Reply
RE: software for static control over individual pixels

You can also load WLED () onto your ESPixelStick (or any of the variants) and it allows you to have preset patterns....

6 years ago
Reply
RE: Finally found good site for Bulk Wire in Canada

Thanks for letting us know.... Shipping things like cable and enclosures across the border is extremely expensive.. It's great to find a Canadian ve...

6 years ago
Page 7 / 8