I'm looking to control basic 7x10 DMX LED color changers with Vixen 3 (they are 8 channel). We use a Enttec DMX USB Pro interface.
Is this possible? If so, can someone give me a jumpstart on how to get setup?
We've done a few setups using pixels and Falcon boards, but never DMX.
Many thanks!!
So I have the Setup preview window configured. It seems to see the DMX Pro interface and I have the elements for the first Light (8 channels) patched to outputs 1-8.
The light is physically setup to the DMX channel 001.
Now In the sequence window, how do I get the light to react? Whatever I put in the timeline it seems to have no effect on the light.
It would seem that I need to put some sort of value on the dimming channel (intensity value?) but I don't see how I would do that. It would seem that the RGB channels would need a value as well.
Similarly, would it be possible to add effects (for example, Spin or Butterfly) to the fixtures?
Hey is there anyone who can weigh in here?
thanks.
Do you know the various channel assignments for the DMX fixture?
As in what the fixture does for each of the channels that it has?
There is no standard so each fixture can be different...
xLights treats each channel like a led but a DMX fixture may require some control channels (like dimmer or mode) to have a certain value before the R/G/B channels will output anything...
You have two choices, and it has to do whether you want to 1) do more manual work and be able to use the white channel, or 2) skip that work and use only the RGB channels.
Option 1)
For this you'll need three elements
Flood RGB
Flood White
Flood Master Dimmer
Define the color handling for the RGB element as full mixing RGB and patch it to channels 2-4
Define the color handling for the white element as single color, set the color to white, and patch it to channel 5
Now select the Master dimmer element and patch it directly (with no color handling) to channel 1
Any time you want the light to be on, you'll need effects on the master dimmer element as well as one of the two other channels. It is perfectly ok to have a full white set level on the master dimmer channel that lasts the entire duration of every sequence.
2)
Define one RGB element with full RGB color handling and patch it to channels 2-4
Switch the center pane of display setup to graphical view.
Select the RGB element, and channels 1-4 of the controller
use the plus at the bottom of the center pane to add a dimming curve.
Set the curve to look like this:
Then manually patch the RGB element to the dimming curve and the dimming curve to channel 1. It should look like this:
What this second option does is takes a copy of whatever values are on the RGB element and forces it to 100% and feeds it to the master dimmer channel. This way you don't need to manually manage effects on a separate master dimmer element. Unfortunately you can't patch two elements to one filter, or channel, so you can't use this method when you'[re using RGB and white elements.
DMX Gear can be a bit funny as to what signals on what channels that it needs to see to work. Especially if the instructions are a tad lacking.
Do you have the channel list for the lights? If it is as above...
CH1 Dimmer
CH2 RED dimmer
CH3 GREEN dimmer
CH4 BLUE dimmer
CH5 WHITE dimmer
CH6 0-15 No action 16-255 strobe slow to fast
CH7 Speed for CH8
CH8 color mixing and run automatically
You will probably find you need to place a full constant 255 value against Channel 1 to be able to activate the lights. One way to check is to buy a little DMX slide controller to see what channel does what or you can use something like this... https://www.da-share.com/software/da_tester/ to take Vixen out of the equation. I have found it quite useful over the years to work out where I have stuffed up.
I normally either use a set level ( 0-100 = 0-255) or a custom 16 bit value (0-255) depending on what product I am using or what I am trying to do with it. There is nothing wrong with using the pulse either if you want to dim, just treat 0-100 as 0-255.
As far as other effects go, you pretty much need to treat DMX fixtures as individuals. You can place other effects on them if they are in a group but the result will be extremely random as the signal pushes to each channel.
Visualizing it can be a bit funny as well, however it can be done. The colours on the sequence mean nothing, that is purely for visual and the preview.
Bretherton's example is similar to my option 1 above. Except that he treats R G and B as separate single color elements. There's no reason why you actually need to do that. It's easier to just combine the RGB channels into one element so you can take advantage of the full color system in vixen. He's just showing it that way to help you visualize what's going on behind the scenes.
You could actually use the option 2 above and modify the color breakdown and add the white channel to it. Then patch that 4th output of the color breakdown to channel 5 on the light. But you're not going to be happy with the end result. You'll find white will end up coming on and mixing with your colors a lot more than you want it to.
jchuchla wrote:Bretherton's example is similar to my option 1 above. Except that he treats R G and B as separate single color elements. There's no reason why you actually need to do that. It's easier to just combine the RGB channels into one element so you can take advantage of the full color system in vixen. He's just showing it that way to help you visualize what's going on behind the scenes.You could actually use the option 2 above and modify the color breakdown and add the white channel to it. Then patch that 4th output of the color breakdown to channel 5 on the light. But you're not going to be happy with the end result. You'll find white will end up coming on and mixing with your colors a lot more than you want it to.
Yep, Sorry. I took too long to type and did not see the other responses.
That was a set up that I did years ago and never thought to group the RGB channels. I still treat each of my newer DMX stuff as single channels but none of them are standard lights as such. If you can suggest an easier way for these ones I would be a very happy man.
Moving heads with color wheels and prisms and gobos are a different story. You're pretty much stuck with what you've got there already. We've got plans for some fancier stuff, but haven't gotten to it yet.
You could handle the shutter with the same dimming curve patching trick I used above for the master dimmer channel.
You don't need to define elements for the channels you're not using. Nor do they need to be patched. Except when they need to be set to a non-zero level.
Chances are you'll never use the "fine" channels for movement within vixen. We have no way to deal with that anyhow. (yet)
Many thanks Jon, Really looking forward to giving option 1 a go!
The DMX display in question here is 365 days per year, but we do add exterior moving head Search lights for our annual event during the Christmas season.
Those have 20 channels (can list them if it would be helpful) but we only use XY (a basic repeating figure 8) and strike on/off.
Would there be a way to control those (It seems you may have answered that previously) or do we have to continue to use QLC+ for the searchlights this year?
For what it's worth, the channel assignment for the DMX fixtures (the 365 ones) are:
CH1: Dimmer (1-255)
CH2: Red (1-255 Dimmer)
CH3: Green (1-255 Dimmer)
CH4: Blue (1-255 Dimmer)
CH5: White (1-255 Dimmer)
CH6: Strobe (1-15 no action) (16-255 Slow > Fast)
CH7: Speed (1-255)
CH8: Color Mixing (slow > fast) (255 Sound)




