mr fix
@mr-fix
Estimable Member
Joined: Jan 8, 2021
Topics: 5 / Replies: 151
Reply
RE: no signal going to relays

Thank you I will try again Sent from my SM-N975U using Tapatalk

4 years ago
Forum
Reply
RE: no signal going to relays

I tried that looks very different than vixen And doesn't the arduino code need to be different? Sent from my SM-N975U using Tapatalk

4 years ago
Forum
Reply
RE: no signal going to relays

Question last year I ran a arduino mega on vixen running 32 relays ran great now I use xlights and how do I use the arduino in xlights to run the rela...

4 years ago
Forum
Reply
RE: Do 5volt ws2811s pixels work with a smart receiver for the f16v4?

MartinMueller2003 wrote:The Data line on the 5v and 12v WS281x pixels ALL USE 5v. Your 12v pixels drop the voltage internally to 5v and then feed it i...

5 years ago
Reply
RE: Do 5volt ws2811s pixels work with a smart receiver for the f16v4?

i have the F16V4 and i use the v5 ws2811 with no problem. Sent from my SM-N975U using Tapatalk

5 years ago
Reply
RE: Has anyon used more than two Arduinos with vixen 3 using pixels?

i use 1 arduino mega 2560 2 arduino uno 2 arduino teensy 3.2 octo 1 usb extender and i use a usb hub to split the data out side at a main outdoor bo...

5 years ago
Forum
Reply
RE: Led lights are on but dim

sounds like you have a voltage leak can you take some pics of the wireing. Sent from my SM-N975U using Tapatalk

5 years ago
Forum
Reply
RE: Initial Setup

not all effects will work with this set up as most are for the pixels but if you creat a groupe for all your elements yoi can us more of the effects i...

5 years ago
Reply
RE: what Raspberry Pi Model do i need?

so i got the pi3 and falcon f16 v4 controler seems to work so i thaught . how do i put the x lights Sequence onto the FPP and play it through the Fal...

5 years ago
Forum
Topic
Replies: 0
Views: 954
Reply
RE: Arduino Meltdown

i use this sketch i have the mega 2560 and the uno sketch works great on both. Sent from my SM-N975U using Tapatalk

5 years ago
Forum
Reply
RE: Arduino Meltdown

recopy that scetch i made the change for you see if it works now Sent from my SM-N975U using Tapatalk

5 years ago
Forum
Reply
RE: Arduino Meltdown

olny change the numbers from 16 to 48 Sent from my SM-N975U using Tapatalk

5 years ago
Forum
Reply
RE: Arduino Meltdown

Change this part that says #define CHANNEL_COUNT 16 to say #define CHANNEL_COUNT 48 And in the park that says inverted or not inverted it would depen...

5 years ago
Forum
Reply
RE: Arduino Meltdown

Compare your sketch this one this sketch works perfectly. and in vixel ise the header ~! Sent from my SM-N975U using Tapatalk

5 years ago
Forum
Page 4 / 11