Something that I did when I needed 25ms in a small area was to sequence the whole song in 50ms, then convert it to 25ms. It double squared everything ...
I used the RS232->RS485 converter listed in the previous post and put it in a simple project box from Radio Shack along with a RJ45 jack. This is wher...
Re: 2.0 Release, what is wrong? I had this same problem with the shortcut. I deleted it, and re-created it, then everything worked fine. - Michael
More pictures View of under side of board with next ZipTie going up. View of ZipTie going up and connecting to first ZipTie on cane. Used parts of ot...
Macrosill wrote:Any close up pics Michael? Here are a few pictures I took while making them. This shows the finished product. Large counter bore ho...
My 32 Candy Canes are spaced at 2' and they look good. I have mine mounted on 2x4 wood with 4 per board. This works great for setup, takedown, and st...
I found a great help was to place green outdoor carpet over my control boxes and hide most of the extra wires under it. They look good at night before...
I am wondering to what snow depth can you see the lights under the snow? I have about 12" left on my roof and probably about 2' on the ground. It is a...
For me it was cheaper to use LED's for my roof lights. I was able to run all of the LED's on my roof with just 3 channels because I can string them al...
When testing to see if the board is working, do not just use a volt meter, or a small load. Put an actual load on the channel, like a string of lights...
Since this is the Lounge and I can go off topic here, I will. Studies have shown that installing red light cameras do increase the number of accident...
By the time I got done with my display last year, it was over $25/channel for about 128 channels, with everything included. Controllers, cables, enclo...
Reminds me of when I went to see Stomp
You could also make a blank sequence that is 9 minutes long and add it to the end of your current program, and then just keep repeating the whole 30 m...
Last year I was able to run the show machine for 29 days without a reboot. I am up to about 6 days so far this year and hope to make it the rest of th...
