Notifications
Clear all
memphislights2
@memphislights2
Trusted Member
Joined: Oct 28, 2024
Topics: 2 / Replies: 83
Reply
RE: Renard connection question

Try with just the usb-serial cable plugged into the serial port on the SS24 to make sure the adapter is working and you have it configured properly (c...

1 year ago
Forum
Reply
RE: Pixel string not lighting up at all

My friend uses Falcon F16v3s with the additional 4 differential receivers (4 outputs each) and F48s with 12 differential receivers (4 outputs each). ...

1 year ago
Reply
RE: Renard connection question

Just for reference, if you are going to use CAT5/6 from pc usb adapter to first SS24, check the wiki to make your adapter.

1 year ago
Forum
Reply
RE: Pixel string not lighting up at all

other things to check/try. 1. see if the connectors are on the correct ends of the string (ie input connector is wired to the end of the string) 2. se...

1 year ago
Reply
RE: WTB Lnyx Express or Renard Controllers

I still have a bunch of LE v5 complete and looking for new homes. Ignore the name of the post since I was originally selling the REN SS24s.

1 year ago
Reply
RE: Best Clips for a Grid Drop Ceiling....

If you have a 3d printer, try some models at Thingiverse. Otherwise, try Amazon.

1 year ago
Forum
Reply
RE: Newbie wanting to get started

Strips depend on the manufacturer. They usually have a marking on the string where you can cut like old rope light. You will also see 3-4 (3 for WS2...

1 year ago
Reply
RE: Led/pixel matrix questions

Garage is 1in spacing 3'x4' if I remember correctly. The house is 2 in spacing if I remember correctly. He only used it once This is 2" spacing He a...

2 years ago
Forum
Reply
RE: Lighting advice or suggestions

Looks like a 4 channel preprogrammed controller

2 years ago
Forum
Reply
RE: How long are your pixels lasting?

try replacing the pixel before the one acting up.

2 years ago
Reply
RE: Switching to FPP with Ren64 and PX1

Configured Com port is 4. It looks like you are setting up as Com port 5. What port shows up in device manager?

2 years ago
Reply
RE: Vixen 3 shuts down when opening 'Configure Preview'

Same process. Seemed to work as expected. No crash.

2 years ago
Forum
Reply
RE: How long are your pixels lasting?

Most pixels are 2-4 years old. I have no idea of brand. Most are 4" or 6" spacing red white blue wire bullets and squares. Primary failures are one...

2 years ago
Reply
RE: Vixen 3 shuts down when opening 'Configure Preview'

Vixen opened up fine, no errors opened Setup Previews Add New Preview Selected Vixen Display Preview Configure Preview - crash

2 years ago
Forum
Reply
RE: Lighting advice or suggestions

Amazon light sequencers

2 years ago
Forum
Page 1 / 6
Share: