Last seen: Nov 21, 2026
Did a little more testing, that sequence is ok. (Run Rudolph Run). FPP connect loads the sequences to sd card from the bottom of the list going up in ...
It's been a rough day just not all with it. Try that attachment.
I can't attach it here. It says unsupported file type and the .fseq is too big. I can send it however works for you.
Ok I got some time to mess around with this. 1. I added 2 more sequences for testing. I now have 13 sequences 2. I added the resistor as stated before...
I loaded the newest firmware on a Wemos D1 mini (ESP32) and got the same result as above. I had to load a few sequences like 3 times to get the full s...
So I loaded the newest firmware and still only 10 display in file manager. I loaded the sequences in reverse order this time and now the Silver sequen...
Here's some screenshots. Amazing Grace is missing but I can play it from Falcon Player so I know it's there. I have a custom ESP32 that has 8mb flash ...
Which firmware version are you running so I can program with the same one and maybe I will get success?
I can add that resistor easy enough. The board is all made and 99% surface mount but I can get on the ESP32 socket pins on the back very easy. Thanks ...
I can send the admin page snapshot when I get home. I won't get back home until after 7:30 tonight. Thank you for all your help with this.
I was reading on the forum about SD cards just now and found a post back from 2016 that says a 10k pullup on MISO. I do not have that at the moment. C...
That is correct it does not display in the file manager UI. It is not just the 1 file, I've loaded the sequences in different orders and anything over...
I forgot to say that I want to us GPIO 32 and 33 for relay outputs. Also how do I get ws2801 lights to run? I see they're on output 6 but when using t...
I used GPIO 32 as one of the RMT outputs, this made the sd card say no files were on it. I changed it back to a different GPIO and all files on the sd...
