I also tried the web flasher and remapped pins for the Quad to match my setup. The same problems happened with this also. I also would lose all conne...
I now have the same problem as Utimgr. I compiled my own firmware with the 9-23 last week and the Octa and Quad were working with this. I compiled the...
When I get home I’ll try the Quad firmware on one of my boards. I think I compiled a custom version of the Quad for my board.
I don't own either the Quad or Uno so I'm just reading what it says.
Something isn't right. The Uno should be outputting to only 2 ports, not 4 ports. By chance did the programmed Quad and Uno get mixed up? This is anot...
Did you use the visualizer in Xlights to upload your light configuration to the Quad? When you upload your configs to the Quad from Xlights it will tu...
martinmueller2003
I got the dist file from GitHub where the latest files are.
With the Wemos D1 Mini looks like you would lose- 1. I2C (GPIO 32 is in the outside row) 2. Relay (GPIO 15 is in the outside row) 3. Temp Sensor (GPIO...
If you're interested in the ESPixelStick V4, PM me I have some extra boards I had made. It would be minus the ESP32 d1 mini and SD card. This will wor...
I believe on mine, if I don’t uncheck “keep channel numbers” an error comes up telling me that has to be unchecked. Keep in mind I also let xlights ta...
I got it all to work like above. I was prepared to go the route you described if I couldn't get this work. Thanks for the info, it would probably be e...
I watched a video showing how to set up the dig quad for relays. The only thing I didn't do previously was to check the PWM box. I did that and the le...
I configured the ESP relay port from the UI and used the effects . The led still stays on, no blinking or won't shut off until I disable the output. I...
