Wayne J wrote:My guess is that is a PIC loaded with Diagnostic Firmware. That's what I thought wayne. I flashed it and then I am now at the point wh...
Wayne J wrote:I cant help with DMX, but as for the LEDs, do you have the shunt on JP3? Yes shunt is on. I tested as per the troubleshooting guide th...
jcmarksafb wrote:Would help to know what sequencer you are using. I use HLS, but can convert or use xlights with other sequences.
derekbackus wrote:I used #10x1/4 screws without washers. For the ends, I used D rings with the same screws, but a washer on each side. Love these thin...
Looks great so far! What do you use for a spiral? Are those pixel strips?
I wouldn't mind white or black. Whichever you have is fine with me.
I'm in for 50 James.
james70818 wrote:31 strips all rolled up. Surprising how big they get. The good news is I can get about 40 of them in a USPS tyvek shipping bag. Wo...
I would be in for 40
I would be in for 50 as well.
I would be in for 10 hopefully $5.50 or less.
I ended up making mine from a breadboard. It worked the first year but since then has not worked right. I would be interested in getting one of these...
This looks like what I'm looking for. Do you still have the home etch files and arduino code? Also if you have extra arduino a I'll buy one off you. O...
