Wow! How did you make the dowels for the guide wires?
From what I've seen the entec open are very slow in the way they process the information and there will be noticeable delays in your show. You should ...
CaptKirk wrote: In order to keep all RJ45 DMX interconnects capable, the adapter I was talking about was a pin swap to get the data on the correct pin...
Thanks for the info!--- I am here:
Re: Need Help -- Renard SS24 with dmx Problem solved...turns out it was a bad pic. Luckily I had extra parts. Even though it flashed several times a...
Cool song...thanks for posting
jrock64 wrote:My poles are just 8 channels 100 minis each. 3/4 gray electrical conduit. 1/2in emt is slipped inside to add rigidity. The posts are 2....
Livermore-Dad wrote:Thanks man Ya I'm looking to stick my rainbow spots in them, so far it's looking pretty cool, the globes get kind of magical with...
I am redoing the ridge line this year to use 1" pvc with 'legs' on each side that can be filled with sand or if need be, you could use metal for the w...
djulien wrote:That is a similar size to my front yard. I generally use a "row" of props stretching across the yard about half way back, and then some...
I am interested in (1) ss16 pcb & bom & heat sink (2) ss24 PCBs & Boms & heatsinks(1) spare parts
