Has anyone ever posted an "alternate" parts list? Mouser seems to be out if stock a lot lately. It would be nice to have. I know mouser will sugge...
There are more than 362 days in a year.
Chrome and IE in that order.
budude wrote:I didn't use the white LEDs - might install them next year - haven't decided yet. I was looking at some of the "blacklight" LEDs for Hall...
budude wrote:I am using 100 ohm for Blue/Green and 150 ohm for Red - this got me to about 18mA for all LED colors. What are you using for White?
0123456789
Three Four One
budude wrote:It might be too much stress to yank out all those resistors by prying them out. Anything you have that can pull on the resistor lead (eit...
budude wrote:Been there... I installed 180ohm for my Red LED only to find it was way too dim (even though I had breadboarded the LEDs and everything -...
budude wrote:The idea is to get around 18-20mA per path so you have to determine the drop across the limiting resistor. The Red LEDs drops around 2v, ...
Frank, got a question. I must be blind or something. I have these 2k resistors that I originally thought were 100 Ohm resistors. Ok, Red/Black/Red...
RPM wrote:Electrically they are equivalent, but check the temperature specs. I believe the ST485 is rated at -40 to 85 C where the 75176 is rated at ...
