On the 682, you will have to pick the right configuration of your string/strip so you have 2 ... rgb, or grb as you already have blue taken care of. R...
Xlights 4 can be used as a sequencer, player, and scheduler, and it is free. As far as "regular" LED's and pixels, there is really very little differe...
Xlights 4 can be used as a sequencer, player, and scheduler. It is also very easy to load FPP to the pi player. As far as "regular" LED's and pixels, ...
are you clicking on "update system information" after changing universe numbers?
Hello stump and welcome to the hobby. Here are a few links to help you get started. A manual Some controller boards for pixels (There are cheaper one...
It was just a reminder that if doing pixels, you have to use a range divisible by 3 and not to "split" pixels between universes. John
Just a reminder. Universes are 510 channels or 170 pixels each for pixels not 512 channels. If you are going 512 channels per universe for pixels you ...
Generally the input is male and output is female. Just think of your power outlets in the house female delivers the power and the male end is what you...
Just add a new timing track and make sure its selected, hilight where you want your timing mark to go on the waveform, let up on the mouse and type "t...
Here is a good starting point to read
You'll have to have a sequencer also. I would suggest xlights 4. It's the shortest way to outputting to the pi. It's free here download the latest ver...
Make sure you wait until it's totally dry and see if there is any water or pooling in/on your prop.
In multicast, you only have 7 universes available on the 682. In unicast you have 12 universes max available. A screen shot of the setup page would re...
I have replace all of my resistor packs with 33 ohms. On short or long runs that solved my flickering problems. I have 5 682's. Here is a link to the ...
I think you will find that when you video, your lights will look a lot brighter. I have to turn mine down for my matrix when I video to even see whats...
