How did you mount the fuse blocks in the enclosures and still kept it weather proof? Any pictures?Sent from my iPhone using Tapatalk
What does your solder joints look like when you do a power injection midline? Do you use pigtails? Do you use wire nuts? You use shrink wrap? If you a...
I have toyed with the tee idea and it seems like it is great if you are going to inject with the same power supply. What if you are going to inject wi...
I am curious if anyone could provide pictures of how they wired up their power in injections. That may help out with the explanationSent from my iPhon...
I don't know if the splitter will work or not, but if it doesn't you could just replace it with another switch, right?Sent from my iPhone using Tapata...
Re: Behind the Scenes of the Johnson Family Light Show...(with beginner explanati... idleup wrote:Jeff, 1. Those brackets are channels of aluminum t...
Behind the Scenes of the Johnson Family Light Show...(with beginner explanati... idleup wrote:Here you go... some pictures of the rail system. I thin...
Roterhead wrote:60A / 0.060A/pixel = 1000 pixels @ 5v/pixel 37A / 0.040A/pixel = ~940 pixels @ 12v/pixel However you should assume about 20% less pix...
But if the second round won't happen in time for this season then I would probably get some more nowSent from my iPhone using Tapatalk
When do you think there will be a second round? I would like to get the first three I ordered and if they are as good or better than the e682 then I w...
I purchased two boards with expansions last night. What do you recommend for an enclosure for the board plus expansion? Would it work if I put the boa...
From the images I am guessing that each output can push 5 amps. How many amps can the board push all together? Is it limited to 60 like the e682 or ca...
plasmadrive wrote:I wouldn't mount a power supply of any real size in any of these enclosures. I know some of the guys do it, but it goes against eve...
