jeffmill wrote:Very COOL !!!! I'm stealing it .. thats all there is to it. LOL 😆 😉 😀 😮 😆 😉 😀 😮 😆 Me Like it TO...
P. Short wrote:You need ground going from the Grinch/595 to both the source of power and to the parallel port. It's best to do both, even if you are ...
P. Short wrote:In general, you need to bring in both power and ground. -- Phil I had the 3# pin going to ground on the Parallel port as indicated ...
P. Short wrote:The parallel port does not supply power, there aren't any power pins on the the parallel port connector. You can't get enough power ou...
Wayne J wrote:Wayne, how is he powering the board? Through the RJ45? Is so we may have to think about that adapter I sent. It's assembled for a G...
Wayne J wrote:OK, just just done the trace transfer on the above Grinch baord. I add a power LED and 4 mounting holes also. 😉 It is only 2x3 inches. ...
bnfmsgeek wrote:No what I meant was the board you build for me will give me an example for a duplicate. I decided I'll do an 8 channel system. I will ...
I have a DB25 to RJ45 adapter I can pass on. Shawn
Dan Ross wrote:Mine arrived in less than a week (I ordered on thursday night and had it by wed of the following week) from canada. I haven't run it on...
Re: Any boards left? zaker wrote:wjohn, Are there any Ren64 boards left? If so, how much for 2? I've been out of the loop this summer and want to s...
This is a DIY type forum and most of the options are not kits but Bare boards, with that in mind you would need to determine the type of system you wa...
mberghi wrote:Hi, I am new to the lighting controlling world and would like to have a fairly simple Christmas light display this winter. Do you think ...
Josh wrote:does jameco sell the pcb mount fuse holder? The only ones I see have the solder pins 90 degrees to the body and would not work well. But...
There are two things you might want to get if you don't have it. Wire to go from the fuse holder to the PCB and Shrink tubing to go over the connetio...
Mudsculpter wrote:I think there should be a link to that tutorial from the wiki if that is allowed I don't see why a link would be a problem. cop...
