Raspberry Pi 3 w/Falcon Pi Player for just under 32k DMX channels.
I realize I'm bucking the trend, but if I'm creating a "long" string of lights that I know is going to be used the same way for multiple years, I skip...
Cmschleich wrote:Thanks for taking the time. What is the custom code for? It is important to remember that for the 14 years prior to this one, I di...
ranjanpa wrote:Thanks Greg. Do you buy them off Amazon? And what is the amp Rating.Also what is a good source for the wires- is it 18 gauge. Fuse Ho...
The Camera is about 125 feet in those videos. Most people view between 80-90 feet from the base of the grid, but some view from a side street which...
Based on the the picture you supplied, Red = Postive (12v) and black = Ground, so yes. It should be pointed out that there is no standard for wire co...
Santacarl wrote:Anybody have a link to some matrix intense displays? I'm looking for ideas or should I say I'm looking for justification to see if th...
I've used two of these for the last 3 years in Cincinnati, Ohio weather. No problems. That said, every other power supply I've purchased since ...
Let me second that EasyPix comment from Dave. The older version, i wouldn't have recommended but the newer versions have replaceable fuses and driv...
I use bullet Pixels because they are *way* easier to fix than string and can be easily spaced with plastic strip from different vendors. Although I ...
ranjanpa wrote:Awesome. Thanks for the tour. Can you show a close up of how you send the power and signal separately. Do you connect only two leads in...
If you have a little bit of programming knowledge, E1.31 is *very* easy to develop your own code to control. We have a custom count down clock that ...
Very nice!
Very nice..... Direct link to the video:
