Well, if you added the extension and the problem popped up, try removing the extension and see if that is the problem, could be your extension is bad.
klyneshouse wrote: I cannot see your circuit from your picture, how exactly was that done ? Nicely done, I am going out now to search for unwanted do...
corytcline wrote:me and gebbinn must have been typing at the same time Yeah, I noticed when I posted that your response was there I would suggest y...
dirknerkle wrote:As long as it still transmits, I'd say just use it. You might pick up a backup sometime though, just in case something *really bad* h...
make sure your com port on your computer has not changed. I dont understand why, but every time I unplug my adapter and plug it back in, Windows puts...
DIY Sparks wrote:That was great, Gebbinn! Looks like their bodies already hit the floor. LOL, thanks guys, but the skulls are not sequenced to anyt...
These will be in a room that is close to total darkness, so I figured the brightness wont matter much.
and a video of the completed work.br> Ok, so I figured out how to change the audio on youtube, so you cant hear my wife talking in the background anym...
Sorry guys, this was for stand alone. I have more than one prop that I want to do this to, and I already have the LEDs wired in to the props. In tot...
So basically, if I use this diagram from the wiki I could wire that up, and wire my leds to r1 on the - side, and say, r2 and r3 on the + side? Or...
Top right of your picture. Under the M there is a dot, that is what I would say is pin 1, like livermore-dad said
Gebbinn wrote:again, I refer to the post before yours. I did not in fact tie the grounds together, they are all separate, I only tied them together i...
Jrd wrote:Ah yes, the neutral of the lights is tied to the DC ground. again, I refer to the post before yours. I did not in fact tie the grounds to...
