Double check all solder joints, make sure chips are in the right way, and make sure you cable from pc to olsen is pined correctly
Is this the first time running the system??? If so What type of chips you using MBI or Allegro chip?? If MBI they are very voltage sensitive i Had s...
it's a 20 amp GFI and im running a Max of 10 amps
The MBI's are very voltage sensative i had to drop down to 4.46 volts to get them to work with the allegro chip i got my free sample in a few days and...
i run mine into a walmart Tv/Fm amp and then run a long coax out and a tv/fm antenna i get a good 1/4 mile clear as day
a basic on/off would be nice every outlet and every switch in my house is on x10 and that will be nice to intergrate x10 into my display. I know it's...
The square pad on j2 signifies the 5VDC + If you are running an external power supply remove the jumper on J1
had mine for free in 5 days. I also boughts some after that fact but you get 6 free
got to love them little devils 8)
it's not the size of your lighting display it's what you do with it 😀
thanks
what program are the pcb files using I use PCB artist and can't view that files.
