aussiephil wrote:Mathematics............. sigh, why is this so hard. lets see, if 100% is store as 1 and 1% is stored as 0.01 then to get DMX output ...
aussiephil wrote:Erik Bit hard to test something in actuality when the output module does't exist however.... what Vixen3 is doing in terms of effect...
ErnieHorning wrote:This is starting to sound like one of the black hole discussions that I have with some of the programmers at work for something so ...
Sounds like an interesting project. I would be interested in one. Erik
As far as the performance of Vixen 3 is concerned, lets see how it actually performs. We have a beta out, test it, and if the performance is not satis...
I can explain a situation where the 0-255 fails, but the 0-100% works. Lets say I have channel 1, and 2 controllers, a 8 bit (256), and a 12 bit cont...
1 - E681 PCB/EEPROM/pixel connectors 1 - E681 BOM Erik
budude wrote:The E68x only come in one flavor - each supports 16 strings. You could do 13 strings of 50 but someone suggested sticking with 16 strings...
JHinkle wrote:I must not have worded my question correctly because your reply was based on internal storage - floating point double. Somewhere in Vix...
JHinkle wrote:The user interface uses 0 to 100% to identify illumination levels. Is there a setting or configuration that tells Vixen what size of nu...
CaptKirk wrote:Did the Entec Pro capability mentioned way earlier in the thread get any traction?? It's close. I need to do some device testing on i...
plasmata wrote:I had the same issue with the Display Previewer not saving my design but I found that if I changed the Display Element name from the de...
ppohlman wrote:If I come across anything else, I will post it in the other thread then. Are you only looking for bugs/issues, or also feature "reques...
ppohlman wrote:I just noticed this thread that is specific for the Display Previewer. First off, Erik you've done an excellent job with this so far. ...
ppohlman wrote:I think he meant that you need to drag a "new" effect from the toolbar into the additional channel. Yep, that was what I meant to say...
