dvc2013
@dvc2013
Reputable Member
Joined: Jan 13, 2013
Topics: 12 / Replies: 305
Reply
RE: SSR's for sale

The SSRoz also has no connection for the neutrals, they must be connected together off-board. The SSRez has connections for the neutrals on the PCB m...

11 years ago
Reply
RE: Solder Station HELP! - Crazy Temp Swings with a CSI Station 3ldf

Yep, that's about right. Their shipping is very pricey.

11 years ago
Reply
RE: Solder Station HELP! - Crazy Temp Swings with a CSI Station 3ldf

Same thing happened to mine. Same model number. I called them and they sent me a new handle/iron for no charge.

11 years ago
Reply
RE: LEDancer/PICkit2 How to compile?

I have the LEDancer HEX file if that will help you.

12 years ago
Forum
Reply
RE: LEDancer/PICkit2 How to compile?

I'm not sure after reading the OP if your problem is assembling the ASM file to get the HEX file, or loading the hex file on to the chip ???The same t...

12 years ago
Forum
Reply
RE: Happy Birthday Macrosill

Have a great day Brian !!!!!

12 years ago
Forum
Reply
RE: DB9 to RJ45 cable question

I'm fairly certain that a standard cable won't work. At least it never did for me. This is probably what you need:: Also if you already have a cabl...

12 years ago
Forum
Reply
RE: 595 Olsen DMX

Depending on the cost I would be in for a couple of bare PCBs.

12 years ago
Forum
Reply
RE: RenC Grinch problem

Terry, verify you have a good Zero Cross signal to the Ren-C. Is the ZC led flashing about every second or so ???

12 years ago
Forum
Reply
RE: WTB Ren C

Sent you a PM

12 years ago
Reply
Reply
RE: Xbee gear

PM Sent !!!

12 years ago
Reply
RE: DMX WS2812 firmware

Glad you are back RPM !!!

12 years ago
Forum
DMX
Reply
RE: Is the Grinch controller still avialable

Hi Andy !!! I agree with all of the posters above that the Renard series boards are great boards that will give you some features that aren't availab...

12 years ago
Forum
Reply
RE: Trying to put the old with the new ...

I used 2 of these boards this past season. They are still a good board for AC lighting. The data input pins are the same as the other Renards SS boa...

12 years ago
Page 11 / 22