Billmaxpowers wrote:Just wondering were you are sourcing the Resistors? Are you getting them from Mouser or some place cheaper. These are the one...
Just signed on to the forums since last holidays, looks like people like these things. 🙂 Glad to help. I don't remember if I posted this video or ...
176 Channels, Vixen 2. Yeah, you would think that channel output isn't configured correctly. I'm beyond tired right now trying to troubleshoot, I'll...
Confirmed the chips work by swapping them out with known working ones. Then I started switching how the boards were being daisy chained. Doesn't mat...
hasoon wrote:How did you attach the LEDs to the heat syncs? Heat sink adhesive compound. I had a tube laying around from a kit that is used to put ...
jaywalk101 wrote:Btw... I like how your illuminating your windows. What type of RGB device are you using to do that? Thanks! RGB 5050 LED Strips ...
10 floods, but yes I could run another 2 for a total of 12. I printed off the numbers/letters on a sheet of paper, then used them as stencils to cut ...
I have 1 Ren48 built, and another awaiting to be built (for Christmas). I also have a Simple Ren32 RBGW - which is controlling the face, windows, and ...
Just wanted to report back, haven't had any problems out of these and they've been running for over a week now.
Wonder how the LM317 will do with dimming?
I've only got 4 built so far, the wall in the video will have 5 when I get done building the rest. So far they look good. They are bright! I'm prob...
In circuit measurements: 22ohm Resistor (Red channel): 5.46v drop, 240mA = 1.31 watts 10ohm Resistor (Green channel): 3.00v drop, 290mA = 0.87 watts ...
griffixdc wrote:Drweird was suggesting to use(2 watt/ 10ohm and 22 ohm)? If you're going the resister route, definitely want to get larger wattage r...
