Activity
 
Notifications
Clear all
df101
@df101
Trusted Member
Joined: Jan 23, 2018
Topics: 11 / Replies: 29
Reply
RE: Best way to line roof with c9's?

The clips may not clip onto the pixel light. The c9 technicolour pixels I ordered were bigger than standard, not the c9 covers themselves they were st...

7 years ago
Forum
Reply
RE: Powering from the end not working

Which brand or who sells the thicker wire 12v lights/pixels? If the wire is thin, it defeats the purpose of 12v pixels, might as well go with the chea...

7 years ago
Reply
RE: Powering from the end not working

At 50% brightness the lights look better but I prefer to not have it setup that way. The wire gauge is what i thought the problem may be. The wires ...

7 years ago
Reply
RE: Powering from the end not working

Thank you for the help. I will make sure to send the ground line along with the signal/data line from my controller(Arduino). I do have separate conne...

7 years ago
Topic
Replies: 9
Views: 4336
Reply
RE: Layers

A mixer makes sense. When one string has 'Twinkle' effect and the rest of strings are set to black with a 'Set Level' effect, then the one string incr...

7 years ago
Forum
Topic
7 years ago
Forum
Replies: 2
Views: 7421
Reply
RE: Do you use the mark manager?

One feature that is a must is to be able to move multiple marks from one collection to another, all at once. Currently i have to copy each individual ...

8 years ago
Forum
Reply
RE: Power supply dropping voltage

Nothing pops up about memory or swapping while sequence is playing. However, just looked at Vixen website for recommended PC specs and My laptop doesn...

9 years ago
Reply
RE: Power supply dropping voltage

PC: Intel Celeron @1.7GHz, 4 GB RAM, Windows 7, 64 bit .VIXEN 3.4u2 is 64 bit .No other program is running while sequence is playing .Arduino Mega 2...

9 years ago
Reply
RE: Power supply dropping voltage

Turned on all pixels on LAST STRING to white and 100% brightness. Measured current through injection line and got 0.9A. Ideally it should be 3A, but w...

9 years ago
Topic
Replies: 12
Views: 4540
Reply
RE: Can Ur controller and lights have separate power supplies

It works. �� Powering from the end of the 3rd string of lights worked. But why does it work? If the first two strings can be powered fr...

9 years ago
Page 2 / 3
Share: