I'm in, would love to have something the guys at work can look at.
check out this one I know it is not just the LED but I have posted pictures of four running in front of my place (total length of house is 85 feet to ...
you might add your location to your profile also, there probably is a member near you willing to help.
watch the video again and if you listen REAL CLOSE, he does say he uses the solder on the tip as a heat transfer. It took about 5-6 times thru for me...
watch the video again and if you listen REAL CLOSE he does say he uses the solder on the tip as heat transfer. It took about 5-6 times thru for me to...
that was well worth the laugh, thanks
not sure I did mine "by the book" but I could not get the solder to flow through the board either, I did get a good bond to the pad and found out on a...
got mine today also! Boards look great-thanks for all your efforts!!
Thank you, I have about 20 hours trying to make it work and its not going well to say the least, I have finally decided to use audacity and a printed...
okay, is everybody kidding or is there something in Papagayo that I am missing? have tried loading one verse, two words, up to the entire song and all...
boards look great, now to build arches. Thanks for doing this
guess I should have specified-- the advise was to physically check all components (yes with a DMM) not meaning to offend anyone but the colors are wha...
step one, my parts were bagged by steps and the R1, R2 resistors are supposed to be 2 - 750 Ohm, what I actually recieved was 1-750 Ohm, 1-27k Ohm, no...
God speed on a quick recovery from Dumas texas
Congrats, Bet they are all a blast when the lights go up.
