Had someone back out on these so they are still available.
my mistake Im using RS485 and not RS232, so jumper is correct. I really do appreciate everyone's help on this! I think best thing now is too reprogr...
ok here is a picture of the front and back
thanks I was measuring the voltage wrong, measuring between the pins is 5v so seems that is not the problem.
i tested pins 1-14 by first removing the ic chips and then using my multi-meter to measure the voltage separately on pin 1 and then again on pin14.
yes the chips should have be pre-programmed. Do you think the chips could be causing the problem here? Also I checked the voltage on J8 pins and it’...
yeah from the PX1 Wiki page it says that all 4 lights should come on after running the application and mine don't. My USB/RS232 works fine for my Ren...
I double checked from my device manager and baud rate is set at 115200, this is the same for the pic.
I'll take 3 FWC 3 Diode packs zip code is 76247 Thanks, Chip
Re: Renard PX1 Pixel Controller is now available (current 2-3-15) payment sent for 2 kits
Re: Renard PX1 Pixel Controller is now available (current 12-8-14) I would be interested in 2 of them also
