MartinMueller2003 wrote:What are you trying to accomplish? The export I am familiar with creates fseq files and is executed by vixen while a sequence ...
My understanding is a Pi cap is for small and/or remote elements, or test benching. I use a Pi 3 with FPP to 3 Falcon F16s. FPP on a Pi runs circles ...
Cmschleich wrote:I have struggled tonight to try to find the answer if FPP is compatible with a Pi 4. I didn't find the answer in the manual or falcon...
I have struggled tonight to try to find the answer if FPP is compatible with a Pi 4. I didn't find the answer in the manual or falconchristmas forum.
jchuchla wrote:It sounds like someone set you down a vastly oversimplified path. And while what they helped you set up worked for that specific scena...
jchuchla wrote:If you're sending to two different controllers, and using unicast, you should be using two different controllers in vixen, and differen...
jeffu231 wrote:Seems like the 2&3 floods are just picking the first 6 channels of data in the chain if setting the start channel to 4 works. Have you ...
More direct control of, or more intuitive if I am missing something, over the absolute address space. The more I do this the less I use (and think in)...
I think I accidentally did this while using FPP test mode and selecting color with the color spectrum square it provides (btw if you have FPP this wou...
Lightupchristmas2019 wrote:Thank for the replies. I looked for answers as to what controller was better between the falcon and the e682 and I couldn't...
Lightupchristmas2019 wrote:Hello everyone, first year show here and this fourm has been awesome. I have figured a lot out just by reading this but I'm...
Stormyblade wrote:I think I found it (finally!) in the manual -- left click, drag your mouse across all the effects that you want to change the colors...
ScareCrowe wrote:Your post was definitely on point! First off, your post was much more than I anticipated getting. The videos with reference points f...
