Notifications
Clear all
chilloutdocdoc
@chilloutdocdoc
Prominent Member
Joined: Nov 23, 2008
Topics: 41 / Replies: 748
Reply
RE: Set dmx address from vixen

P. Short wrote:I would suggest that people only plan on changing the address for the first PIC on the board. It would become quite confusing if the o...

15 years ago
Forum
Reply
RE: Set dmx address from vixen

I'm working on the final steps of the code for the DMX DC9 that I've designed. I took the JEC code along with the postings in the file library about t...

15 years ago
Forum
Reply
RE: Freestyler working/ Vixen not

+1 to the Enttec Open setup. The other thing that "could" be happening is that Vixen is blasting away the DMX data faster than DMX spec states. I've s...

15 years ago
Forum
DMX
Reply
RE: Lessons learnt DMX over IP.. Part(1) there is standards / there is no standards

mrpackethead wrote:0. Was everything plugged in properly? 2. Can we assume that the network hardware was properly handling the multi-cast setup (both...

15 years ago
Forum
DMX
Reply
RE: Lessons learnt DMX over IP.. Part(1) there is standards / there is no standards

mrpackethead wrote:And that really summarizes why i've made Lesson #1, "don't assume its going work". I' was really hoping to hear some storys ab...

15 years ago
Forum
DMX
Reply
RE: E1.31 (sACN) to DMX Bridge

Welcome back Robert. Great to hear from you, hope all is well. I'll be in for one on the next run.

15 years ago
Forum
DMX
Reply
RE: Happy Birthday chilloutdocdoc

Thank you everyone. Turning out to be a great day thus far. Chris, still gonna call you grandpa, in fact that's what you're listed in my e-mail list ...

15 years ago
Forum
Reply
RE: ColorMotions Tree

Walter, truly spectacular. Did you ever get any close-ups on the hardware side of things? I was thinking of going with the poly strapping this year as...

15 years ago
Forum
Reply
RE: Chat.. its not liking me these days

What version of java are you using? I am able to get in under chrome.

15 years ago
Forum
Reply
RE: What controllers are people using for 5050 LED Strips?

Henedce wrote:With all 4 of my Ren64 boards running PWM I still need zero crossing to reset the board. Are you running the DC firmware? From what I ...

15 years ago
Forum
Reply
RE: What controllers are people using for 5050 LED Strips?

I'm just putting the finishing touches on a controller that will handle three full rolls of 30L/meter strip or 3x Half a roll of 60L/Meter strip or 3 ...

15 years ago
Forum
Reply
RE: Set dmx address from vixen

CaptKirk wrote:Yes we need to keep doing this sort of thing the same hardcoded (which sounds a lot like hard-headed) way we always have. We should ig...

15 years ago
Forum
Reply
RE: Dmx dc 8 ssr

Matt, Thank you for reminding me, I had been meaning to do this for quite some time and didn't have the chance to. Hooked up a 12V 25W bulb (actual ...

15 years ago
Forum
Reply
RE: Dmx dc 8 ssr

A 15A fuse will be used.

15 years ago
Forum
Reply
RE: Dmx dc 8 ssr

Alright great news for all 0 of you that were probably following along with this. I've got the prototype board up and running, almost done designing t...

15 years ago
Forum
Page 3 / 53
Share: