I upgraded my FPP to 3.6.2 and this year I cannot get my AC lights going on my Arduino Mega. My PC blew up this summer and I lost my old sketch and my...
Were you able to find a How to? ESPixelStick firmware to NodeMCU? I can't seem to find anything on it. dhenning wrote:I was able to get the ESPixelSt...
Wow! Thanks so much for your help. I had no idea the different color needed different voltages. I have tons of info here. I'll let you know how the te...
Use ~! for the header in Controller setup in Vixen and make sure the baud rate in vixen and the sketch/code above match.
Here is the Sketch I use: // Copy from this line down to your new sketch // This code was written by Victor Perez for doityourselfchristmas.com based...
If my FPP/RPi reboots I have a hell of a time trying to get my Arduino/AC lights to sync up again. I've tried different ways ie to reload the fpp the...
I'm Still a newbie at this. I love using Vixen. I found it to be more user friendly than Xlights. Easier to setup your display and map items. I'm not ...
Oh! Thanks for your reply. But i managed to get one.
thanks you everyone for your ideas and support.................and tonight I was going to get back at it and everything is working perfect. AC lights ...
Yeah Everything is set to 57600, i just double checked, Vixen/FPP and Arduino code i used
The FPP does see the Arduino. fpp@FPP:~$ sudo lsusb -v | grep "Bus 001" Bus 001 Device 006: ID 2341:0042 Arduino SA Mega 2560 R3 (CDC ACM) Bus 001 De...
Do you have the ground from your power supply and the ground from your controller/data output device tied together?
oh the Pi has a USB Sound card in one port and the Arduino in another. noting in the other USB ports.
So, I'm using the Victor Code as above, and when the sequences are not running I get the random blinking of my AC lights and they all work (16 of them...
