You are using multicast and only need 150 channels per ESP so you can use one universe. In xLights, set the start channel of esps2 to 151 (the next c...
Sounds like your start channels or universe sizes are off.
samckitt wrote:I got to the same point, put in fpp & falcon ID?Password, but it doesnt show up on my wifi network, it is on a pi 0 w, not hard wired. ...
Bump this thread, there are only a few days left, so if you haven't taken the survey and are a FPP user please take a few minutes to respond. Once th...
jchuchla wrote:That's basically the same idea I was running with in my post above except you're doing with pixels where I had dumb rgb with DC dimming...
Ok, off the wall.... [emoji4] How about an ESPixelStick powered by a small 120V to 12V power supply like a wall wart and 1M of 30 LED per meter ws28...
How are the panels laid out physically? On one side, it it 64x16 or 32x32? If 64x16 then create a 2x2 in FPP with the top row being one side of the ...
Check fppd_start.log as well if pod isn't starting. You may need to turn up the log level to debug if nothing is showing up in the logs.
Rooster519 wrote: Edit #2: After actually paying attention to currency and the exchange rate we can drop to $23, SMH. That's an impressive little ...
That isn't a program, it is a git repository of source code to a library and some Python scripts. FPP uses the original version of the library, this ...
If fppd won't start, look in the FPP file manager at the fppd.log file to see if there is any error listed.
Vendor info won't help a whole lot if you are trying to match panels for later. If the panels were made in a different batch then they could be diffe...
Great, thanks for reporting back.
What does your FPP Channel Output screen look like? Do the relays work correctly if you use the FPP channel test page?
Several programs have already had the feature and you can already do something similar with FPP using the GPIO inputs. The main advantage is just tak...
